Remington 493 Provozní pokyny stáhnout pdf (Strana 15)

103500

Operation

5. Squeeze trigger to set power fastener. Be sure to keep pressure on tool during

this operation.

6. Grasp base plate and slide barrel forward rapidly until it stops. Push base plate

back into liner to the closed position. This advances the power load strip and

resets the piston for the next fastening.

WARNING: Do not depress muzzle of tool into barrel assembly when

loading new power fastener. Live power load is in firing position.

7. Should the tool fail to fire, hold the muzzle firmly against the work surface for

30 seconds. Release the trigger and remove pressure on the tool while

holding the muzzle against the work surface. Again press the tool firmly

against the work surface and pull the trigger. If the tool still fails to fire, hold

the tool firmly against the work surface for another 30 seconds before

advancing the power load strip. Use remaining loads in strip. Discard power

load strip into water or oil.

WATER

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Žádné komentáře

Remington 493 Provozní pokyny Strana 15